The Compact Day Midlength Cover is specifically designed to protect your midlength from the harshest conditions.
Featuring three layers of protection, Armour Weave/ uv reflective tarpee and 25mm padded nose, tail and a fin slot. This cover will protect your midlength whether you are travelling or just going down to your local.
Fits: 1 Midlength
Includes: Fin Slot
XP EXTRA PROTECTION 25mm PANELS
Extra protection in high impact areas. Nose, Rails and Tail.
ARMOUR WEAVE (TOP SIDE)
Tear proof, water repellent, tough, lightweight.
UV REFLECTIVE TARPEE (BOTTOM SIDE)
Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.
THREE LAYERS OF PROTECTION
Top Layer: Armour Weave Polyester.
Bottom Layer: UV Reflective Tarpee Lining.
2nd Layer: 5mm shock-absorbing foam.
3rd (inside) Layer: Tarpee lining.
EXPANDABLE TAIL GUSSET
Accommodates boards with both fixed or removable fins. Open velcro gusset to allow for fins.
HEAVY DUTY ZIPPERS
Large, non-corrosive nylon zips.
DETACHABLE SHOULDER STRAP
20mm padded detachable strap.
HANGING HOOK
Patented, removable hanging hook.
Cover Size Max Board Length Max Board Width Cover Weight
6'8" 6'10" / 2083mm 23" / 584mm 1.6kg
7'0" 7'2" / 2184mm 23" / 584mm 1.7kg
7'4" 7'6" / 2286mm 23" / 584mm 1.8kg
7'8" 7'10" / 2387mm 23" / 584mm 1.9kg
8'0" 8'2" / 2489mm 23" / 584mm 2kg
BASED ON AVERAGE BOARD THICKNESS & WIDTH
OCEAN N EARTH
Ocean & Earth was founded by Brian Cregan and Graham Williams's, but was later established by Brian Cregan and partners in 1978 producing a couple of basic surfing products and a staff of three. Ocean & Earth slowly grew by establishing a network of retailers throughout NSW & Southern Qld (Australia). Staff knowledge of surfing helped with product development but many other areas of business were developed via trial and error. The domestic distribution covered the majority of the main surfing areas by the early eighties and some small export sales were achieved by “word of mouth” contacts made by Brian Cregan in his travels surfing around the world. First production was done in an old four-room house and converted shop front. This soon became inadequate and in 1986 a 500sqm factory was built which greatly improved efficiency for the business that was growing at a rate of 30-40% per year. Initial distribution direct from Sussex Inlet was replaced by a distributor in each state and sales servicing for all of NSW was done by a permanent sales person operating from the factory at Sussex Inlet. By the mid to late eighties the Ocean & Earth product range had grown significantly to encompass a broad range of surfing accessories, backpacks and a small range of clothing which still is the backbone of the company today. 2010 saw the introduction of the "World's Strongest Leash" - a fully moulded surf leash as opposed to three piece heat welded surf leash.