The Pyzel Ghost: Proven High Performance Design: The ultimate fusion of speed, control, and responsiveness. The Pyzel Ghost Surfboard outline is refined with the widest point pushed a bit forward of center, but the nose area is kept down and the tail slightly pulled in to help it fit into a tighter curve.
-
Wave Type: The Ghost Surfboard rides its best in hollow and more powerful waves. Reef breaks, beach breaks and point breaks 4ft +
-
Stock Construction: PU Polyurethane (Custom Orders available in EPS Epoxy)
-
Fin System: All stock boards are 5 Plug Systems - Stock Available in both FCSII and Futures
-
Glassing: Stock under 6'2" is 4+4 Deck : 4 Bottom | Stock over 6'2" is 6+4 Deck : 4 Bottom 4/6/4
The Pyzel Ghost Features
Volume Distribution : Volume is concentrated towards the front of the surfboard, enhancing paddle power and wave entry ease. While keeping the tail and rails thinned out to help hold through barrels and turns at speed.
Rocker : The rocker is med/low through the front half getting you into waves easily and pick up speed quickly. The rear end has plenty of rocker curve for turning control and a snappy responsiveness.
Concave : A single concave runs through the entire bottom, with a double concave set inside, equaling speed and lift both on a rail and over flat spots, while still allowing for quick rail-to-rail transitions. The Ghost's combination of rocker and concave makes for high performance handling.
Sizing : Pyzel suggest the following sizing adjustments from your standard daily shortboard dimensions:
Length: Add 0 to 8 inches above your height
Width: Increase by 1/4 to 1/2 inch
Thickness: Enhance by 1/8 to 3/8 inch
Other Board Suggestions: If you are looking at the Ghost but need more volume check out the popular Ghost XL Surfboard
SURFBOARD SAVINGS WITH EVERY PURCHASE: Use any one of the discount codes below when purchasing a new surfboard and save on board addons.
Use promo code: PADDEAL at checkout for 50% off Shapers Tail Pad
Use promo code: DEAL at checkout for 15% off any other Tail Pads, Surfboard Fins, Surf Leashes & Surfboard bags
Requesting Stock & Custom Orders: Can’t find the dims just right for you? Want to add more or less volume, choose a surfboard tint? Custom board orders available on all surfboard models. Contact us online here or Live Chat us to put together your custom order. Production time starting at 4-6 weeks. Minimum $300 deposit required on all custom board orders.
See a size suited to you but not in stock ? Get in touch, we can order this with the quickest turn arounds available in NZ.
STOCK DIMENSIONS:
5' 8" 18 3/4" 2 5/16" 24.5L
5' 8" 18 3/4" 2 5/16" 24.5L
5' 9" 18 7/8" 2 3/8" 25.8L
5' 10" 19 " 2 7/16" 27L
5' 11" 19 1/8" 2 1/2" 28.3L
6' 0" 19 3/8" 2 9/16" 29.7L
6' 1" 19 5/8" 2 5/8" 31.4L
6' 2" 19 3/4" 2 11/16" 32.8L
6' 3" 20 " 2 3/4" 34.5L
6' 4" 20 1/4" 2 7/8" 37.1L
6' 5" 20 3/8" 3 " 39.4L
6' 6" 20 1/2" 3 " 40.2L
6' 8" 20 3/4" 3 1/16" 42.6L
6' 10" 20 7/8" 3 1/8" 45L
7' 0" 21 " 3 3/16" 47.3L
